Enhance Your Cellular Experience with Our WilsonPro A500 Signal Solution - Say Goodbye to Dropped Calls and Hello to Improved Call Quality and Faster Internet!

If you're in need of a powerful home cell phone signal booster, look no further than the WilsonPro A500 - our most popular Booster for homes and small offices. Boasting automatic gain control and a self-optimising design, this booster is designed for quick and effortless installation and maintenance.

Boosts 4G LTE, 3G, and 2G for any building up to 500m²

Works for all phones & cellular devices, all major South African Networks

Complete kit: all parts included, easy install

Who is This For?

For people needing coverage in their home or small office. Best for: homes, small offices, smaller areas within a school, warehouse or complex.

Based on feedback from customers and the installation team, the WilsonPro A500 has the ability to provide coverage for an area between 75m² to 500m². Nonetheless, the exact coverage area is dependent on the presence of a strong outdoor signal and minimal obstruction from the building's interior. You can find additional information regarding the coverage details and results below.

When it comes to poor cellular reception in buildings, the top three causes are typically cell tower distance, outside interference, and building material. Urban areas tend to be more affected by building material, while rural areas often struggle with cell tower distance. No matter where you are, being aware of these factors can assist you in finding the most effective solution to enhance your cellular coverage.

In South Africa, a lot of homes are constructed using high-density materials like thick concrete, brick, and metal, which can interfere with cellular signal. As a result, homes in South Africa may encounter difficulties with cellular coverage due to their construction materials.

Any combination of these obstructions interrupts cellular service inside the home.

*Coverage & Results

**Selected telkom bands only - excluding Telkom LTE (2300Mhz)

The following is an estimation of coverage you will receive depends on your input signal, obstructions and home layout:

Signal Input	Estimated Coverage
-89 AND LOWER About 5 bars	UP TO 500 m²
-90 dB About 3-4 bars	UP TO 250 m²
-100 dB About 1-2 bars	UP TO 120 m²
-110 dB About 1 bar	UP TO 75 m²
No existing Signal	A signal booster likely won’t work

What's in the Kit

A500 Cell Phone Booster

Inside Wall Panel Antenna

Outside Directional Antenna

3 x Low Loss Cables (10m, 15m & 1m Black)

Surge Protector

How it works

Outside Antenna
Pulls in Tower Signal

Signal Booster
Amplifies the Signal

Inside Antenna(s)
Re-broadcasts Signal

Cell Phone
Gets Boosted Signal

Cell Phone Signal Booster Benefits

Eliminates dropped calls
Crystal clear voice
Quick text messages
Faster uploads & downloads (Internet)
Reliable reception

Wider coverage
Consistent connections
Reduces dead zones
Longer battery life
More bars, period!

Specs

A500 Frequencies

Band 1	2100 MHz
Band 3	1800 MHz
Band 8	900 MHz

Impedance	50 Ohm
Max Gain	70 dB
Input Power	AC/DC 5V/3A
Connectors	N-Female
Dimensions	1.5 x 6 x 8.75 in
Weight	0.85kg(amp only)

Download Spec Sheet

Installation Manual

Installation

Installation Overview

Installing the WilsonPro A500 Signal Booster kit system is fairly straightforward, but will require running cable from the roof or elevated location into the building, as well as potentially drilling and screwing in components.

Additionally, before you begin, we recommend that you start with a soft installation, where you don't permanently mount components, drill holes or finalize cable runs until you're sure that the system is performing to the level that you would like. Once you've tested out antenna and component locations, and are satisfied with the results, then you can go ahead and permanently install everything. Finally, read through the entire set of installation instructions both here and in the included manual before beginning, and feel free to call us with any questions before you proceed.

We'll start the installation from the roof and work our way into the building. First, start by determining the part of the roof that receives the best signal, as we'll want to locate the directional antenna there and ideally aim it away from the building (and not back over the roof). Once you've identified the portion of the roof which is best, locate the vertical pole which you'll be mounting the yagi directional antenna as high up on the roof as possible. Attach the directional antenna and temporarily aim it away from the building. Run the 10 meter cable from the antenna into the building.

Once the cable is inside the building, run the cable to the area where you plan to locate the amplifier. Attach the included lightning protector and then connect the 1.5 meter cable to the "Outside Antenna" port of the amplifier. Connect the 15 meter cable to the "Inside Port" on the other side of the amplifier, and run it to the location where you plan to mount the inside antenna. Attach the antenna and install either on the ceiling facing downwards, or on the wall facing across the area that you want to cover with boosted signal.

Once all of the components are connected, power on the amplifier by plugging it in. As it's powering up, you should see the lights flashing, and then check to see that they turn solid green. If the lights are not solid green, check out the portion of the owners manual that discusses the indicator lights to find out what they mean. Of, you can always contact us for help.

Directional antennas must be aimed for best results. When aiming and when mounting the antenna, make sure that it is parallel with the ground, do not aim it up at the sky or down at the ground. Start with the antenna high on the roof pointed in one direction. Turn on the system and have a person inside stand 3 meters in front of the inside antenna and take a signal reading with their phone in field test mode. Rotate the outside antenna 45 degrees (1/8th of the way around) and then pause for 60 seconds. After the pause, the person inside should take another signal reading from exactly the same spot, and then you can repeat the process. After you've gone all the way around, mount the antenna facing in the direction with the strongest signal (decibel signal reading will be closest to 0). If possible, also mount the antenna on that side of the home or office so that it's pointing away from the building and not over the building.

The included manual is very helpful and we recommend reading through it before beginning the installation. If you run into any issues, feel free to contact us for help.

* The actual coverage area of a signal booster is dependent on many factors including existing outside signal strength, obstructions between you and the cell tower, the materials used in your home or office, the layout of the area you need to cover with a boosted signal, and other factors. The approximate coverage areas listed above are estimates. Actual coverage area will vary based on these and other factors. If you're not sure if a system will be powerful enough for your needs, contact us to find out.

Top Signal Booster Amps

Price

Collections

WilsonPro A500 Signal Booster Amp

WilsonPro A1000 Signal Booster Amp